Polymeric Self Adhesive Vinyl Glossy 80 Micro
For Solvent Based Piezo Ink Jet & Electrostatic Printing
Description
PV 80-140G is opaque/transparent, stabilized, calendared vinyl films, offering a wide range of fleet, signage and interior decoration applications. The films are intended for application onto flat & semi curved surfaces.
Characteristics | Description |
Film only |
0.08 mm (80 micron) white/ transparent polymeric calendared vinyl |
Thickness (film + adhesive) |
0.08 to 0.09 mm (80 – 90 micron) |
Adhesive type and colour |
Pressure sensitive |
Liner |
140 g/m2, coated paper |
Application surface |
Semi Curved |
Application substrates |
Glass, metal, paint, rigid plastic & vehicle branding. |
Minimum application temperature (air and substrate) |
10°C |
Removal |
Removable within the warranted durability of the product |
Service temperature range |
-50°C to +90°C |
Tensile strength (min) |
22N/25mm @ 23° |
Applied shrinkage |
< 0.2 mm |
Adhesion (FINAT TM-1, stainless steel, 200 mm/min) | > 18 N/25 mm > 6 N/25 mm |
Shelf Life | 2 years after receipt from ATech (dry conditions, Temp. < 38°C) |
Use a cleaner designed for high-quality painted surfaces. The cleaner must be wet, non-abrasive, without strong solvents, and have a pH value between 3 and 11 (neither strongly acidic nor strongly alkaline).
The shelf life of the film is 2 years and should be applied within 2 years of the receipt of film if unprocessed. Processed film should be applied within 1 year of processing and within 2 years of receipt of the film.
Specifically, we do not warrant this film for the following:
This bulletin does not contain detailed printing, processing or application procedures for the subject products. The appropriate Instruction Bulletin(s) may be obtained by contacting your ATech sales representative or ATech’s Technical Service.
PV 80-140G can be removed within the warranted period. The film has a permanent adhesive.