Polymeric Lamination 80 Micron PVC
Description
PL 80-140G has excellent image performance with solvent based piezo ink jet printers. It also has excellent hiding power. These transparent films are intended for use as printable base film and protective over laminate.
Characteristics | Description |
Film |
3 mil (75μm), transparent (polymeric) |
Thickness (film + adhesive) |
85-95 μm |
Adhesive type and colour |
Pressure sensitive, light gray, permanent, solvent based acrylic |
Liner |
140 g/m2, coated paper |
Application surface |
Semi Curved |
Application substrates |
Glass, metal, paint, rigid plastic & vehicle graphics |
Minimum application temperature (air and substrate) |
10°C |
Removal |
-50°C to +90°C |
Service temperature range |
130% |
Tensile strength (min) |
< 0.5 mm |
Applied shrinkage |
-25°C to +65°C |
Adhesion (FINAT TM-1, stainless steel, 200 mm/min) | > 18 N/25 mm > 6 N/25 mm |
Shelf Life | 2 years after receipt from ATech (dry conditions, Temp. < 38°C) |
An overprint clear or over laminate provides protection to a graphic as well as changing gloss. Typically, only graphics that are subjected to harsh conditions require this protection in order to be warranted. They include:
Graphics Films PL 80-140G can be removed within the warranted period. They have got a permanent adhesiveness.
Specifically, we do not warrant this film for the following: